TP-Link Network Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCI Express Adapter Retail
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

TP-Link Network Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCI Express Adapter Retail

Available:In Stock
  • Product SKU: AIP-245005
$104.16
Image
High Performance for High Demands

The very latest WiFi standard, Wi-Fi 6, provides extreme speed, ultra-low latency,and uninterrupted connectivity so you enjoy faster downloads, smoother streaming, and more immersive gaming.

Deep-Dive into VR
Wi-Fi 6 comes with 1024-QAM and 160 MHz bandwidth, for powerful, continuous WiFi. Bandwidth-intensive applications like VR demand high speeds, which Wi-Fi 6 delivers3 faster than Wi-Fi 5. Just insert Archer TX50E into your PC for fully immersive VR experiences.

Lag No More

Revolutionary OFDMA reduces latency by up to 75% to provide ultra-responsive gaming, uninterrupted video chatting and seamless live streaming.*


Note
: Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and number of connected devices are not guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and AP location.


: Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, HT160, and 1024-QAM require APs to also support the corresponding features.


: 802.11ax 2x2 160 MHz enables 2402 Mbps maximum theoretical data rates, 3 faster than standard 802.11ac 2x2 80 MHz (867 Mbps) and nearly 6x faster than baseline 1x1ac (433 Mbps) Wi-Fi as documented in IEEE 802.11 wireless standard specifications, and require the use of similarly configured 802.11ax wireless network routers.


*: Up to 75% lower latency is based on Intel simulation data of 802.11ax with and without OFDMA using 9 clients. Average latency without OFDM is 36ms, with OFDMA average latency is reduced to 7.6ms. Latency improvement requires that the AP and all clients support OFDMA.

HARDWARE FEATURES
Antenna Type
Two High-Gain Dual Band Antennas
Chipset
Intel Wi-Fi 6 Chipset
WIRELESS FEATURES
Wireless Standards
IEEE 802.11ax/ac/n/a 5 GHz
IEEE 802.11ax/n/g/b 2.4 GHz
Bluetooth 5.0/4.2/4.0
WLAN Signal Rate
5 GHz
11ax: Up to 2402 Mbps(dynamic)
11ac: Up to 1733 Mbps(dynamic)
11n: Up to 300 Mbps(dynamic)
11a: Up to 54 Mbps(dynamic)

2.4 GHz
11ax: Up to 574 Mbps(dynamic)
11n: Up to 300 Mbps(dynamic)
11g: Up to 54 Mbps(dynamic)
11b: Up to 11 Mbps(dynamic)
WLAN Reception Sensitivity
5 GHz :
11ax HT160-56.25dBm
11ax HT80: -59dBm
11ax HT40: -62.25dBm
11ax HT20: -65dBm

11ac HT160-62dBm
11ac HT80: -65.5dBm
11ac HT40: -69.75dBm
11ac HT20: -73.75dBm
11n HT40: -74.5dBm
11n HT20: -77.5dBm
11a 54Mbps: -77.75dBm
11a 6Mbps: -94.5dBm

2.4GHz :
11ax HT40: -60.75dBm
11ax HT20: -63.75dBm
11n HT40: -73dBm
11n HT20: -76.25dBm
11g 54Mbps: -76.5dBm
11b 11Mbps: -89dBm
WLAN Transmit Power
5 GHz : 27dBm(FCC)
2.4 GHz : 26dBm(FCC)
WLAN Modes
Infrastructure mode
Wireless Security
Support 64/128 bit WEP, WPA/WAP2/WPA3, WPA-PSK/WPA2-PSK, 802.1x
Modulation Technology
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM, 1024QAM
Bluetooth Profiles
Archer TX50E support the native BT profiles implemented in Windows 10.
For the latest information on Windows 10 BT profiles please refer to https://support.microsoft.com/en-us/help/10568/windows-10-supported-bluetooth-profiles
OTHERS
Certification
FCC, RoHS
Package Contents
Archer TX50E
Two 5 dBi High-Gain Antennas
Low-Profile Bracket
Bluetooth Header Cable
Quick Installation Guide
Resource CD
System Requirements
Windows 10(64-bit) only
Environment
Operating Temperature: 0oC - 40oC (32oF - 104oF)
Storage Temperature: -40oC - 70oC (-40oF - 158oF)
Operating Humidity: 10% - 90% non-condensing
Storage Humidity: 5% - 90% non-condensing
Item Dimension (L inchxW inchxH inch)
8 x 6 x 2

Weight
1.00 LB

Warranty Information
2 years
High Performance for High Demands

The very latest WiFi standard, Wi-Fi 6, provides extreme speed, ultra-low latency,and uninterrupted connectivity so you enjoy faster downloads, smoother streaming, and more immersive gaming.

Deep-Dive into VR
Wi-Fi 6 comes with 1024-QAM and 160 MHz bandwidth, for powerful, continuous WiFi. Bandwidth-intensive applications like VR demand high speeds, which Wi-Fi 6 delivers3 faster than Wi-Fi 5. Just insert Archer TX50E into your PC for fully immersive VR experiences.

Lag No More

Revolutionary OFDMA reduces latency by up to 75% to provide ultra-responsive gaming, uninterrupted video chatting and seamless live streaming.*


Note
: Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and number of connected devices are not guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and AP location.


: Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, HT160, and 1024-QAM require APs to also support the corresponding features.


: 802.11ax 2x2 160 MHz enables 2402 Mbps maximum theoretical data rates, 3 faster than standard 802.11ac 2x2 80 MHz (867 Mbps) and nearly 6x faster than baseline 1x1ac (433 Mbps) Wi-Fi as documented in IEEE 802.11 wireless standard specifications, and require the use of similarly configured 802.11ax wireless network routers.


*: Up to 75% lower latency is based on Intel simulation data of 802.11ax with and without OFDMA using 9 clients. Average latency without OFDM is 36ms, with OFDMA average latency is reduced to 7.6ms. Latency improvement requires that the AP and all clients support OFDMA.

HARDWARE FEATURES
Antenna Type
Two High-Gain Dual Band Antennas
Chipset
Intel Wi-Fi 6 Chipset
WIRELESS FEATURES
Wireless Standards
IEEE 802.11ax/ac/n/a 5 GHz
IEEE 802.11ax/n/g/b 2.4 GHz
Bluetooth 5.0/4.2/4.0
WLAN Signal Rate
5 GHz
11ax: Up to 2402 Mbps(dynamic)
11ac: Up to 1733 Mbps(dynamic)
11n: Up to 300 Mbps(dynamic)
11a: Up to 54 Mbps(dynamic)

2.4 GHz
11ax: Up to 574 Mbps(dynamic)
11n: Up to 300 Mbps(dynamic)
11g: Up to 54 Mbps(dynamic)
11b: Up to 11 Mbps(dynamic)
WLAN Reception Sensitivity
5 GHz :
11ax HT160-56.25dBm
11ax HT80: -59dBm
11ax HT40: -62.25dBm
11ax HT20: -65dBm

11ac HT160-62dBm
11ac HT80: -65.5dBm
11ac HT40: -69.75dBm
11ac HT20: -73.75dBm
11n HT40: -74.5dBm
11n HT20: -77.5dBm
11a 54Mbps: -77.75dBm
11a 6Mbps: -94.5dBm

2.4GHz :
11ax HT40: -60.75dBm
11ax HT20: -63.75dBm
11n HT40: -73dBm
11n HT20: -76.25dBm
11g 54Mbps: -76.5dBm
11b 11Mbps: -89dBm
WLAN Transmit Power
5 GHz : 27dBm(FCC)
2.4 GHz : 26dBm(FCC)
WLAN Modes
Infrastructure mode
Wireless Security
Support 64/128 bit WEP, WPA/WAP2/WPA3, WPA-PSK/WPA2-PSK, 802.1x
Modulation Technology
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM, 1024QAM
Bluetooth Profiles
Archer TX50E support the native BT profiles implemented in Windows 10.
For the latest information on Windows 10 BT profiles please refer to https://support.microsoft.com/en-us/help/10568/windows-10-supported-bluetooth-profiles
OTHERS
Certification
FCC, RoHS
Package Contents
Archer TX50E
Two 5 dBi High-Gain Antennas
Low-Profile Bracket
Bluetooth Header Cable
Quick Installation Guide
Resource CD
System Requirements
Windows 10(64-bit) only
Environment
Operating Temperature: 0oC - 40oC (32oF - 104oF)
Storage Temperature: -40oC - 70oC (-40oF - 158oF)
Operating Humidity: 10% - 90% non-condensing
Storage Humidity: 5% - 90% non-condensing
Item Dimension (L inchxW inchxH inch)
8 x 6 x 2

Weight
1.00 LB

Warranty Information
2 years

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.