Supermicro Motherboard MBD-X11SSL-F-B Xeon E3-1200 v5 LGA1151 Socket H4 C232 PCI Express SATA MicroATX Bulk
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Supermicro Motherboard MBD-X11SSL-F-B Xeon E3-1200 v5 LGA1151 Socket H4 C232 PCI Express SATA MicroATX Bulk

Available:In Stock
$408.73
Image
Key Features:




1. Single socket H4 (LGA 1151) supports Intel Xeon processor E3-1200 v5, Intel 6th Gen. Core i3 series, Intel Celeron and Intel Pentium

2. Intel C232 chipset

3. Up to 64GB Unbuffered ECC UDIMM DDR4 2133MHz; 4x DIMM slots

4. Expansion slots: 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8)

5. Dual GbE LAN with Intel i210-AT

6. 6x SATA3 (6Gbps) via C232; RAID 0, 1, 5, 10

7. I/O: 1x VGA, 1x COM, 2x SuperDOM

8. 2x SuperDOM with built-in power

9. 5x USB 3.0 (2 rear + 2 via header + 1 Type A), 6x USB 2.0 (2 rear + 4 via headers)

10. Integrated IPMI 2.0 and KVM with Dedicated LAN

Processor/Cache
CPU:
Single Socket H4 (LGA 1151) supports:
- Intel Xeon processor E3-1200 v5, Intel 6th Gen Core i3, Intel Pentium, Intel Celeron processors
- CPU TDP up to 80W
System Memory
Memory Capacity:
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
Memory Type: 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes: 16GB, 8GB, 4GB
Memory Voltage: 1.2V
Error Detection:
- Corrects Single-Bit Errors
- Detects Double Bit Errors (Using ECC Memory)
On-Board Devices
Chipset: Intel C232 Chipset
SATA:
- SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
Network Controllers:
- Dual Intel I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics: Aspeed AST2400 BMC
Input/Output
SATA: 6x SATA3 (6Gbps) ports
LAN:
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB:
- 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
- 6x USB 2.0 ports (2 rear + 4 via header)
VGA: 1x VGA port
Serial Port/Header: 1x COM ports (1 rear)
SuperDOM:
- 2x SuperDOM (Disk on Module) ports with built-in power
TPM: 1x TPM 1.2 20-Pin Header
Expansion Slots
PCI-Express:
- 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 3.0 x4 (in x8) slot
System BIOs
BIOs Type:
128Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
- Hardware BIOs Virus Protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
Management
Software:
- IPMI 2.0 with KVM Support
- NMI
- Watch Dog
- Super Doctor 5
Power Configurations:
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
PC Health Monitoring
Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN:
- Total of 5 fan headers supporting up to 5 fans
5 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip Support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED:
- CPU / System Overheat LED
- Suspend Static Trip Support
- UID/Remote UID
Other Features:
- Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
- RoHS
Form Factor
MicroATX
Item Dimension (L"xW"xH")
10 x 10 x 1

Weight
6.00 lb

Warranty Information
1 Year
Key Features:




1. Single socket H4 (LGA 1151) supports Intel Xeon processor E3-1200 v5, Intel 6th Gen. Core i3 series, Intel Celeron and Intel Pentium

2. Intel C232 chipset

3. Up to 64GB Unbuffered ECC UDIMM DDR4 2133MHz; 4x DIMM slots

4. Expansion slots: 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8)

5. Dual GbE LAN with Intel i210-AT

6. 6x SATA3 (6Gbps) via C232; RAID 0, 1, 5, 10

7. I/O: 1x VGA, 1x COM, 2x SuperDOM

8. 2x SuperDOM with built-in power

9. 5x USB 3.0 (2 rear + 2 via header + 1 Type A), 6x USB 2.0 (2 rear + 4 via headers)

10. Integrated IPMI 2.0 and KVM with Dedicated LAN

Processor/Cache
CPU:
Single Socket H4 (LGA 1151) supports:
- Intel Xeon processor E3-1200 v5, Intel 6th Gen Core i3, Intel Pentium, Intel Celeron processors
- CPU TDP up to 80W
System Memory
Memory Capacity:
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
Memory Type: 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes: 16GB, 8GB, 4GB
Memory Voltage: 1.2V
Error Detection:
- Corrects Single-Bit Errors
- Detects Double Bit Errors (Using ECC Memory)
On-Board Devices
Chipset: Intel C232 Chipset
SATA:
- SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
Network Controllers:
- Dual Intel I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics: Aspeed AST2400 BMC
Input/Output
SATA: 6x SATA3 (6Gbps) ports
LAN:
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB:
- 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
- 6x USB 2.0 ports (2 rear + 4 via header)
VGA: 1x VGA port
Serial Port/Header: 1x COM ports (1 rear)
SuperDOM:
- 2x SuperDOM (Disk on Module) ports with built-in power
TPM: 1x TPM 1.2 20-Pin Header
Expansion Slots
PCI-Express:
- 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 3.0 x4 (in x8) slot
System BIOs
BIOs Type:
128Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOs Features:
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
- Hardware BIOs Virus Protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
Management
Software:
- IPMI 2.0 with KVM Support
- NMI
- Watch Dog
- Super Doctor 5
Power Configurations:
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
PC Health Monitoring
Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN:
- Total of 5 fan headers supporting up to 5 fans
5 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip Support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED:
- CPU / System Overheat LED
- Suspend Static Trip Support
- UID/Remote UID
Other Features:
- Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
- RoHS
Form Factor
MicroATX
Item Dimension (L"xW"xH")
10 x 10 x 1

Weight
6.00 lb

Warranty Information
1 Year

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.