SIIG Accessory CE-H26P11-S1 1080p Wireless USB-C Video Hub Extender - 32ft Color Box
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

SIIG Accessory CE-H26P11-S1 1080p Wireless USB-C Video Hub Extender - 32ft Color Box

Available:In Stock
$222.61
Image
Transmits HDMI video signals wirelessly from a USB-C enabled computer up to 32ft at Full HD 1080p resolution. Note: DisplayPort Alternate mode (DP Alt) signaling or Thunderbolt 3 technology is required through the USB-C port to pass video signal to the extender

Supports HDMI/VGA dual video output simultaneously, and supports up to 1080p@60Hz resolution.

Note: HDMI and VGA outputs will show the same content, both will mirror each other

Adds 2 USB 3.1 Type-A ports with data transmission up to 5Gbps. Connect more USB peripherals, such as flash drives, mouse, keyboards, printers, etc, to USB-C enabled computers

Video signal auto-pairinge for extended or mirror screen configuration between the USB-C source device

Supports simultaneous SD and MicroSD/TF memory card connection

An ideal wireless USB 3.1 USB-C adapter hub for MacBook /MacBook Air, MacBook Pro with Thunderbolt 3 2020/2019/2018/2017, Surface Laptop 3, Surface go, iPad pro 2018/2019/2020, Lenove 720, Dell XPS, and many more USB-C DisplayPort Alternate or Thunderbolt 3 enabled computers

Compatibility Notes:
DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled USB-C port is required for video output through the wireless hub extender

The extender's video outputs work in mirror mode, they will display the same content

Requires USB power source of at least 5V/900mA

HDMI compatibility:
HDMI 1.3
Resolutions:
1080p / 1080i / 720p / 480p
Wireless transmission distance:
1080 at 60Hz: Up to 32ft (10m) Line-of-sight
Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum
Display mode:
Mirror, Extended
(Note: The wireless extenders video outputs support mirror mode, both outputs display the same content)
Audio format:
R/L stereo audio 2-ch
USB 3.1 Gen1 compliant
USB data transfer rate:
Up to 5Gbps
SD and MicroSD/TF card reader:
Transfer rate: Up to 104Mbps
Storage capacity: 2TB
Color:
Black
Housing:
Plastic
Transmitting unit (TX):
Connectors:
1x 24-pin USB-C, Male, Source device connection
2x 9-pin USB 3.0 Type-A, Female, Input
1x SD Card Reader, Female, Input
1x TF (Micro SD) Card Reader, Input
1x Button, Device pairing
Receiving unit (RX):
Connectors:
1x 19-pin HDMI Type-A, Female, Output
1x 15-pin D-Sub VGA, Female, Output
1x 3.5 mm Audio, Output
1x 24-pin, USB-C, DC power, Input
1x Button, Device pairing
Environmental conditions:
Operating temperature: 32 to 122 degrees F
Storage temperature: 14 to 140 degrees F
Relative humidity: 5% to 90% RH (non-condensing)
Certifications/Standards:
FCC, CE, RoHS
Country of origin:
China
System Requirements
USB-C DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled computer
Requires USB power source of minimum 5V/900mA output (USB power cable included)
Package contents
Wireless USB-C Video Hub Extender (1 Transmitter + 1 Receiver)
USB 3.1 Type A to USB-C power cable
Quick Start Guide
Item Dimension (L inchxW inchxH inch)
5 x 1 x 3

Weight
1.00 lb

Warranty Information
2 Years
Transmits HDMI video signals wirelessly from a USB-C enabled computer up to 32ft at Full HD 1080p resolution. Note: DisplayPort Alternate mode (DP Alt) signaling or Thunderbolt 3 technology is required through the USB-C port to pass video signal to the extender

Supports HDMI/VGA dual video output simultaneously, and supports up to 1080p@60Hz resolution.

Note: HDMI and VGA outputs will show the same content, both will mirror each other

Adds 2 USB 3.1 Type-A ports with data transmission up to 5Gbps. Connect more USB peripherals, such as flash drives, mouse, keyboards, printers, etc, to USB-C enabled computers

Video signal auto-pairinge for extended or mirror screen configuration between the USB-C source device

Supports simultaneous SD and MicroSD/TF memory card connection

An ideal wireless USB 3.1 USB-C adapter hub for MacBook /MacBook Air, MacBook Pro with Thunderbolt 3 2020/2019/2018/2017, Surface Laptop 3, Surface go, iPad pro 2018/2019/2020, Lenove 720, Dell XPS, and many more USB-C DisplayPort Alternate or Thunderbolt 3 enabled computers

Compatibility Notes:
DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled USB-C port is required for video output through the wireless hub extender

The extender's video outputs work in mirror mode, they will display the same content

Requires USB power source of at least 5V/900mA

HDMI compatibility:
HDMI 1.3
Resolutions:
1080p / 1080i / 720p / 480p
Wireless transmission distance:
1080 at 60Hz: Up to 32ft (10m) Line-of-sight
Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum
Display mode:
Mirror, Extended
(Note: The wireless extenders video outputs support mirror mode, both outputs display the same content)
Audio format:
R/L stereo audio 2-ch
USB 3.1 Gen1 compliant
USB data transfer rate:
Up to 5Gbps
SD and MicroSD/TF card reader:
Transfer rate: Up to 104Mbps
Storage capacity: 2TB
Color:
Black
Housing:
Plastic
Transmitting unit (TX):
Connectors:
1x 24-pin USB-C, Male, Source device connection
2x 9-pin USB 3.0 Type-A, Female, Input
1x SD Card Reader, Female, Input
1x TF (Micro SD) Card Reader, Input
1x Button, Device pairing
Receiving unit (RX):
Connectors:
1x 19-pin HDMI Type-A, Female, Output
1x 15-pin D-Sub VGA, Female, Output
1x 3.5 mm Audio, Output
1x 24-pin, USB-C, DC power, Input
1x Button, Device pairing
Environmental conditions:
Operating temperature: 32 to 122 degrees F
Storage temperature: 14 to 140 degrees F
Relative humidity: 5% to 90% RH (non-condensing)
Certifications/Standards:
FCC, CE, RoHS
Country of origin:
China
System Requirements
USB-C DisplayPort Alternate mode (DP Alt) or Thunderbolt 3 enabled computer
Requires USB power source of minimum 5V/900mA output (USB power cable included)
Package contents
Wireless USB-C Video Hub Extender (1 Transmitter + 1 Receiver)
USB 3.1 Type A to USB-C power cable
Quick Start Guide
Item Dimension (L inchxW inchxH inch)
5 x 1 x 3

Weight
1.00 lb

Warranty Information
2 Years

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.