Supermicro Motherboard MBD-X10SLQ-L-B Core i7/i5/i3 LGA1150 Socket H3 Q87 DDR3 SATA microATX Bulk
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Supermicro Motherboard MBD-X10SLQ-L-B Core i7/i5/i3 LGA1150 Socket H3 Q87 DDR3 SATA microATX Bulk

Available:In Stock
$334.77
Image
1. Single socket H3 (LGA 1150) supports Intel 4th gen. Core i7/i5/i3, Pentium, Celeron processors

2. Intel Q87 Express Chipset

3. Up to 16GB DDR3 non-ECC 1600MHz UDIMM in 2 sockets

4. Dual Gigabit Ethernet LAN ports (1x Intel i217LM 1x Intel i210AT)

5. 5x SATA 3.0 (6Gb/s)

6. 1x PCI-E 3.0 x16, 1x PCI-E 2.0 x4, and 1x PCI-E 2.0 x1

7. 2x USB 3.0 (2 rear) 6x USB 2.0 (2 rear + 4 via headers)

8. HD Audio 7.1 channel connector by Realtek ALC888S

9. 1x DOM power connector, 1x SPDIF Out Header, 4x COM ports

10. AMT 9.0, vPro

11. UEFI BIOS support

Form Factor
uATX

Processor/Cache
CPU:
Intel 4th Gen Core i7/i5/i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
System Memory
Memory Capacity:
2x 240-pin DDR3 DIMM sockets
Supports up to 16 GB DDR3 non-ECC Un-Buffered memory (UDIMM)

Memory Type:1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:8GB, 4GB, 2GB, 1GB
Memory Voltage:1.5V, 1.35V
On-Board Devices
Chipset:Intel Q87 Express Chipset
SATA:SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST

Network Controllers:
Intel i217LM + Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio:RealTek ALC888S 7.1 High Definition Audio
Video:Intel HD/4600 Processor Graphics
Super I/O:NCT6776D
Input / Output
Serial ATA:5x SATA 3.0 ports (6Gbps)
LAN:2x RJ45 Gigabit Ethernet LAN ports

USB:
2x USB 3.0 ports (2 rear)
6x USB 2.0 ports (2 rear, 4 via headers)

Audio:7.1 HD Audio header and rear I/O
Display:1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
Serial Port / Header:4x COM ports (headers) COM2 with RS422/485 support
DOM:SATA DOM (Disk on Module) power connector support
Security:1 TPM 1.2 20-pin Header
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16 (in x16) slot
1x PCI-E 2.0 x4 slot
1x PCI-E 2.0 x1 slot

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
Management
Software:
SuperDoctor III
Watch Dog
AMT
NMI
vPro

Power Configurations:
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN:
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Adaptive Thermal Monitor, PECI 3.0

LED:
CPU / System Overheat LED
+5V Standby alert LED

Other Features:
Chassis intrusion detection
Chassis intrusion header
Weight:
3 lb

Warranty Information:
1 Year
1. Single socket H3 (LGA 1150) supports Intel 4th gen. Core i7/i5/i3, Pentium, Celeron processors

2. Intel Q87 Express Chipset

3. Up to 16GB DDR3 non-ECC 1600MHz UDIMM in 2 sockets

4. Dual Gigabit Ethernet LAN ports (1x Intel i217LM 1x Intel i210AT)

5. 5x SATA 3.0 (6Gb/s)

6. 1x PCI-E 3.0 x16, 1x PCI-E 2.0 x4, and 1x PCI-E 2.0 x1

7. 2x USB 3.0 (2 rear) 6x USB 2.0 (2 rear + 4 via headers)

8. HD Audio 7.1 channel connector by Realtek ALC888S

9. 1x DOM power connector, 1x SPDIF Out Header, 4x COM ports

10. AMT 9.0, vPro

11. UEFI BIOS support

Form Factor
uATX

Processor/Cache
CPU:
Intel 4th Gen Core i7/i5/i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
System Memory
Memory Capacity:
2x 240-pin DDR3 DIMM sockets
Supports up to 16 GB DDR3 non-ECC Un-Buffered memory (UDIMM)

Memory Type:1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:8GB, 4GB, 2GB, 1GB
Memory Voltage:1.5V, 1.35V
On-Board Devices
Chipset:Intel Q87 Express Chipset
SATA:SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST

Network Controllers:
Intel i217LM + Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio:RealTek ALC888S 7.1 High Definition Audio
Video:Intel HD/4600 Processor Graphics
Super I/O:NCT6776D
Input / Output
Serial ATA:5x SATA 3.0 ports (6Gbps)
LAN:2x RJ45 Gigabit Ethernet LAN ports

USB:
2x USB 3.0 ports (2 rear)
6x USB 2.0 ports (2 rear, 4 via headers)

Audio:7.1 HD Audio header and rear I/O
Display:1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
Serial Port / Header:4x COM ports (headers) COM2 with RS422/485 support
DOM:SATA DOM (Disk on Module) power connector support
Security:1 TPM 1.2 20-pin Header
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16 (in x16) slot
1x PCI-E 2.0 x4 slot
1x PCI-E 2.0 x1 slot

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
Management
Software:
SuperDoctor III
Watch Dog
AMT
NMI
vPro

Power Configurations:
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN:
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Adaptive Thermal Monitor, PECI 3.0

LED:
CPU / System Overheat LED
+5V Standby alert LED

Other Features:
Chassis intrusion detection
Chassis intrusion header
Weight:
3 lb

Warranty Information:
1 Year

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.