Supermicro Motherboard MBD-H12DSI-N6-O SoC AMD EPYC7003/7002 SP3 4TB DDR4 EATX Retail
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Supermicro Motherboard MBD-H12DSI-N6-O SoC AMD EPYC7003/7002 SP3 4TB DDR4 EATX Retail

Available:In Stock
$1,201.15
Image
Key Features
1.Dual AMD EPYC 7003/7002 Series Processors
2.4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
3.Expansion slots:
3 PCI-E 4.0 x16 slots, 3 PCI-E 4.0 x8 slots
M.2 Interface: 1 PCI-E 4.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key
4.10 SATA3, 2 SATADOM, 4 NVMe
5.Dual Gigabit LAN ports,
1 dedicated IPMI LAN Port
6.ASPEED AST2600 BMC graphics
7.2 USB 2.0 ports (rear),
4 USB 3.0 ports (2 rear, 2 headers)
8.8x 4-pin PWM Fans and Speed control

Physical Stats
Form Factor
EATX
Dimensions
12" x 13.05" (30.5cm x 33.1cm)
Processor/Chipset
CPU
Dual AMD EPYC 7003/7002 Series Processors
Socket SP3
Cores
Up to 64 Cores
Chipset
System on Chip
System Memory
Memory Capacity
16 DIMM slots
Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes
8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
SATA3 (6 Gbps)
IPMI
Support for Intelligent Platform Management Interface v. 2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2600 BMC
Network Controllers
Dual LAN via Broadcom BCM5720L Gigabit Ethernet Controller
VGA
ASPEED AST2600 BMC
Input / Output
SATA
10 SATA3 (6 Gbps) ports
LAN
2x 1GbE LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 2.0 ports (rear)
4 USB 3.0 ports (2 rear, 2 headers)
VGA
1 VGA port
Others
1 COM port (rear)
2 SATA DOM power connectors
4 PCI-E 4.0 NVMe x4 internal ports
TPM 2.0 header
Expansion Slots
PCI-Express
3 PCI-E 4.0 x16 slots
3 PCI-E 4.0 x8 slots
M.2
Interface: 1 PCI-E 4.0 x4
Form Factor: 2280, 22110
Key: M-key
Chassis ( Optimized for H12DSi-N6)
2U
SCLA25TQC-R609LP
SCLA26AC12-R920LP1
3U
SC835TQC-R1K03B
Server(s) (with H12DSi-N6)
Model(s)
AS -2024S-TR
AS -2024S-TRT
System BIOS
BIOS Type
AMI 256Mb SPI Flash EEPROM
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 6.2
USB Keyboard Support
SMBIOS 3.1.1
Management
Software
Super Doctor 5
Watch Dog
NMI
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations
ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +1.5V, +1.8V, +12V, +5V, +5V standby
CPU switching voltage regulator
VBAT
FAN
Up to 8 fan status tachometer monitoring
Up to 8x 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
Environmental Specifications
Operating Temperature:
10oC to 35oC (50oF to 95oF)
Non-operating Temperature:
-40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Item Dimension (L"xW"xH")
NA

Weight
4 lbs

Warranty Information
1 Year
Key Features
1.Dual AMD EPYC 7003/7002 Series Processors
2.4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
3.Expansion slots:
3 PCI-E 4.0 x16 slots, 3 PCI-E 4.0 x8 slots
M.2 Interface: 1 PCI-E 4.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key
4.10 SATA3, 2 SATADOM, 4 NVMe
5.Dual Gigabit LAN ports,
1 dedicated IPMI LAN Port
6.ASPEED AST2600 BMC graphics
7.2 USB 2.0 ports (rear),
4 USB 3.0 ports (2 rear, 2 headers)
8.8x 4-pin PWM Fans and Speed control

Physical Stats
Form Factor
EATX
Dimensions
12" x 13.05" (30.5cm x 33.1cm)
Processor/Chipset
CPU
Dual AMD EPYC 7003/7002 Series Processors
Socket SP3
Cores
Up to 64 Cores
Chipset
System on Chip
System Memory
Memory Capacity
16 DIMM slots
Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes
8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
SATA3 (6 Gbps)
IPMI
Support for Intelligent Platform Management Interface v. 2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2600 BMC
Network Controllers
Dual LAN via Broadcom BCM5720L Gigabit Ethernet Controller
VGA
ASPEED AST2600 BMC
Input / Output
SATA
10 SATA3 (6 Gbps) ports
LAN
2x 1GbE LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 2.0 ports (rear)
4 USB 3.0 ports (2 rear, 2 headers)
VGA
1 VGA port
Others
1 COM port (rear)
2 SATA DOM power connectors
4 PCI-E 4.0 NVMe x4 internal ports
TPM 2.0 header
Expansion Slots
PCI-Express
3 PCI-E 4.0 x16 slots
3 PCI-E 4.0 x8 slots
M.2
Interface: 1 PCI-E 4.0 x4
Form Factor: 2280, 22110
Key: M-key
Chassis ( Optimized for H12DSi-N6)
2U
SCLA25TQC-R609LP
SCLA26AC12-R920LP1
3U
SC835TQC-R1K03B
Server(s) (with H12DSi-N6)
Model(s)
AS -2024S-TR
AS -2024S-TRT
System BIOS
BIOS Type
AMI 256Mb SPI Flash EEPROM
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 6.2
USB Keyboard Support
SMBIOS 3.1.1
Management
Software
Super Doctor 5
Watch Dog
NMI
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations
ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +1.5V, +1.8V, +12V, +5V, +5V standby
CPU switching voltage regulator
VBAT
FAN
Up to 8 fan status tachometer monitoring
Up to 8x 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
Environmental Specifications
Operating Temperature:
10oC to 35oC (50oF to 95oF)
Non-operating Temperature:
-40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Item Dimension (L"xW"xH")
NA

Weight
4 lbs

Warranty Information
1 Year

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.