Kingston Memory KSM32RD8/16HDR 16GB 3200MHz DDR4 ECC Registered CL22 DIMM 2Rx8 Hynix D Retail
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Kingston Memory KSM32RD8/16HDR 16GB 3200MHz DDR4 ECC Registered CL22 DIMM 2Rx8 Hynix D Retail

Available:In Stock
$156.81
Image
DESCRIPTION

Kingston's KSM32RD8/16HDR is a 2G x 72-bit (16GB)
DDR4-3200 CL22 SDRAM (Synchronous DRAM) registered w/
parity, 2Rx8, ECC, memory module, based on eighteen 1G x
8-bit FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:


FEATURES

Power Supply: VDD = 1.2V

VDDQ = 1.2V

VPP = 2.5V

VDDSPD = 2.41V to 2.75V

Functionality and operations comply with the DDR4 SDRAM datasheet

16 internal banks

Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available

Data transfer rates: PC4-3200, PC4-2933, PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Supports ECC error correction and detection

On-Die Termination (ODT)

Temperature sensor with integrated SPD

This product is in compliance with the RoHS directive.

Per DRAM Addressability is supported

Internal Vref DQ level generation is available

Write CRC is supported at all speed grades

CA parity (Command/Address Parity) mode is supported

CL(IDD)
22 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
IDD Specifications
IDD
Symbol 3200 Units
IDD0 1019 mA
IDD0A 1019 mA
IDD1 1125 mA
IDD1A 1151 mA
IDD2N 960 mA
IDD2NA 961 mA
IDD2NT 1052 mA
IDD2NL 826 mA
IDD2NG 957 mA
IDD2ND 938 mA
IDD2NP 970 mA
IDD2P 626 mA
IDD2Q 893 mA
IDD3N 992 mA
IDD3NA 992 mA
IDD3P 693 mA
IDD4R 1787 mA
IDD4RA 1814 mA
IDD4RB 1803 mA
IDD4W 1775 mA
IDD4WA 1823 mA
IDD4WB 1717 mA
IDD4WC 1767 mA
IDD4WP 1982 mA
IDD5B 2475 mA
IDD5F2 1982 mA
IDD5F4 1830 mA
IDD6N 322 mA
IDD6E 451 mA
IDD6R 203 mA
IDD6A 451 mA
IDD7 1930 mA
IDD8 157 mA
IPP
Symbol 3200 Units
IPP0 56 mA
IPP1 60 mA
IPP2N 41 mA
IPP2P 33 mA
IPP3N 197 mA
IPP3P 193 mA
IPP4R 149 mA
IPP4W 147 mA
IPP5B 507 mA
IPP5F2 344 mA
IPP5F4 285 mA
IPP6N 73 mA
IPP6E 104 mA
IPP6R 50 mA
IPP6A 102 mA
IPP7 161 mA
IPP8 35 mA
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Module Assembly
DRAM:
HYNIX (D-DIE)
RCD:
Rambus
Item Dimension (L inchxW inchxH inch)
7 x 3 x 1
Weight
1.00lb
Warranty Information
Lifetime Warranty
DESCRIPTION

Kingston's KSM32RD8/16HDR is a 2G x 72-bit (16GB)
DDR4-3200 CL22 SDRAM (Synchronous DRAM) registered w/
parity, 2Rx8, ECC, memory module, based on eighteen 1G x
8-bit FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:


FEATURES

Power Supply: VDD = 1.2V

VDDQ = 1.2V

VPP = 2.5V

VDDSPD = 2.41V to 2.75V

Functionality and operations comply with the DDR4 SDRAM datasheet

16 internal banks

Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available

Data transfer rates: PC4-3200, PC4-2933, PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Supports ECC error correction and detection

On-Die Termination (ODT)

Temperature sensor with integrated SPD

This product is in compliance with the RoHS directive.

Per DRAM Addressability is supported

Internal Vref DQ level generation is available

Write CRC is supported at all speed grades

CA parity (Command/Address Parity) mode is supported

CL(IDD)
22 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
IDD Specifications
IDD
Symbol 3200 Units
IDD0 1019 mA
IDD0A 1019 mA
IDD1 1125 mA
IDD1A 1151 mA
IDD2N 960 mA
IDD2NA 961 mA
IDD2NT 1052 mA
IDD2NL 826 mA
IDD2NG 957 mA
IDD2ND 938 mA
IDD2NP 970 mA
IDD2P 626 mA
IDD2Q 893 mA
IDD3N 992 mA
IDD3NA 992 mA
IDD3P 693 mA
IDD4R 1787 mA
IDD4RA 1814 mA
IDD4RB 1803 mA
IDD4W 1775 mA
IDD4WA 1823 mA
IDD4WB 1717 mA
IDD4WC 1767 mA
IDD4WP 1982 mA
IDD5B 2475 mA
IDD5F2 1982 mA
IDD5F4 1830 mA
IDD6N 322 mA
IDD6E 451 mA
IDD6R 203 mA
IDD6A 451 mA
IDD7 1930 mA
IDD8 157 mA
IPP
Symbol 3200 Units
IPP0 56 mA
IPP1 60 mA
IPP2N 41 mA
IPP2P 33 mA
IPP3N 197 mA
IPP3P 193 mA
IPP4R 149 mA
IPP4W 147 mA
IPP5B 507 mA
IPP5F2 344 mA
IPP5F4 285 mA
IPP6N 73 mA
IPP6E 104 mA
IPP6R 50 mA
IPP6A 102 mA
IPP7 161 mA
IPP8 35 mA
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Module Assembly
DRAM:
HYNIX (D-DIE)
RCD:
Rambus
Item Dimension (L inchxW inchxH inch)
7 x 3 x 1
Weight
1.00lb
Warranty Information
Lifetime Warranty

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.