EnGenius Networking EWS385AP Neutron 11ac Wave2 Tri-Band Managed Indoor Wireless AccessPoint Retail
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

EnGenius Networking EWS385AP Neutron 11ac Wave2 Tri-Band Managed Indoor Wireless AccessPoint Retail

Available:In Stock
$211.06
Image
EnGenius Neutron EWS385AP 11ac Wave 2 Tri-Band Managed Indoor Wireless Access Point delivers extremely fast 2.2 Gbps speeds and twice the user capacity. This three radio AP with MU-MIMO and beamforming features meshing, supports PoE, and improves connection reliability for dense user environments, delivering high performing, advanced, enterprise-class Wi-Fi.

11ac Wave 2 Tri-Band AP Supports 2.4 GHz/5 GHz/5 GHz

Reach up to 2.2 Gbps; 400 Mbps (2.4 GHz), to 867 Mbps/867 Mbps (5 GHz)

Quad-Core CPU, 4x ARM Cortex A7 Processor, 717 MHz

MU-MIMO Improves Performance & Increases User Device Capacities

Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs

2Xs the User Capacity of 5 GHz Devices on the Network

Technical Specifications
Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.11a/n/ac on 5 GHz
Processor
Qualcomm 717 MHz Quad-Core CPU
4x ARM Cortex A7
Antenna
2 x 2.4 GHz: 5 dBi
4 x 5 GHz: 5 dBi
Integrated Omni-Directional Antenna
Physical Interface
2 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port
1x DC Jack
1 x Reset Button
LED Indicators
1 x Power
2 x LAN
1 x 2.4 GHz
2 x 5 GHz
Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC/1A Power Adapter
Maximum Power Consumption
10W
Surge Protection
0.5KV
Wireless and Radio Specifications
Operating Frequency
Tri-Radio Concurrent 2.4 GHz/5 GHz/5 GHz
Operation Modes
Management: AP, Mesh and AP Mesh Modes
Standalone: AP, WDS AP, WDS Bridge, WDS Station, Repeater
Frequency Radio
2.4 GHz: 2400 MHz - 2835 MHz
Main 5 GHz: 5470 MHz - 5725 MHz, 5725 MHz - 5875 MHz,
Second 5150 MHz - 5250 MHz, 5250 MHz - 5350 MHz
Transmit Power
Up to 22 dBm on 2.4 GHz
Up to 22 dBm on 5 GHz
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2x2:2
SU-MIMO
Two (2) Spatial Stream SU-MIMO up to 1167 Mbps to a single client
MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 867 Mbps to two (2) 1x1 wireless devices simultaneously
Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS is 1 to 2)
Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 Streams
Channelization
802.11ac Supports Very High Throughput (VHT)VHT 20/40/80 MHz
802.11n Supports High Throughput (HT)HT 20/40 MHz
802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz RadioVHT 40 MHz (256-QAM)
802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID
Supports 24 SSIDs, 8 on 2.4 GHz and 16 on both 5 GHz bands
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
Cross-Band VLAN Pass-Through
Management VLAN
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
Complaint With IEEE 802.11e Standard
WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Management Features
Deployment Options
Stand-Alone (Individually Managed)
Managed Mode (with Neutron Series Switch/ezMaster)
Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Captive Portal
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Band Steering
Prefer 5 GHz
Force 5 GHz
Band Balance
Load Balance
Traffic Shaping
VLANs for Access Point Multiple SSIDs
Backup/Restore Settings
Auto Reboot
E-Mail Alert
Site Survey
Save Configuration as Default
Wireless Management Features (With ezMaster and Neutron Switch)
AP Auto Discovery and Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Band Steering
Prefer 5 GHz
Force 5 GHz
Band Balance
Load Balance
Traffic Shaping
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP - Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic and Usage Statistics
Real-Time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
One-Click Update
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler
Control Features
Managed Mode (w/Neutron Switch/ezMaster)
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting (802.1x)
Power Save Mode (U-APSD Support)
CLI Support
HTTPS
Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP Using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation
Environmental and Physical
Temperature Range
Operating: 32o F-104o F (0o C-40o C)
Storage: -22o F-176o F (-30o C-80o C)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Package Contents
1 - EWS385AP Tri-Band Indoor Access Point
1 - T-Rail Mounting Kits
1 - Ceiling and Wall Mount Screw Kits
1 - Mounting Brackets
1 - RJ-45 Ethernet Cables
1 - Quick Installation Guide
Certifications
FCC
CE
Item Dimension (L"xW"xH")
10 x 10 x 5

Weight
4 lbs

Warranty Information
1 Year
EnGenius Neutron EWS385AP 11ac Wave 2 Tri-Band Managed Indoor Wireless Access Point delivers extremely fast 2.2 Gbps speeds and twice the user capacity. This three radio AP with MU-MIMO and beamforming features meshing, supports PoE, and improves connection reliability for dense user environments, delivering high performing, advanced, enterprise-class Wi-Fi.

11ac Wave 2 Tri-Band AP Supports 2.4 GHz/5 GHz/5 GHz

Reach up to 2.2 Gbps; 400 Mbps (2.4 GHz), to 867 Mbps/867 Mbps (5 GHz)

Quad-Core CPU, 4x ARM Cortex A7 Processor, 717 MHz

MU-MIMO Improves Performance & Increases User Device Capacities

Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs

2Xs the User Capacity of 5 GHz Devices on the Network

Technical Specifications
Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.11a/n/ac on 5 GHz
Processor
Qualcomm 717 MHz Quad-Core CPU
4x ARM Cortex A7
Antenna
2 x 2.4 GHz: 5 dBi
4 x 5 GHz: 5 dBi
Integrated Omni-Directional Antenna
Physical Interface
2 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port
1x DC Jack
1 x Reset Button
LED Indicators
1 x Power
2 x LAN
1 x 2.4 GHz
2 x 5 GHz
Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC/1A Power Adapter
Maximum Power Consumption
10W
Surge Protection
0.5KV
Wireless and Radio Specifications
Operating Frequency
Tri-Radio Concurrent 2.4 GHz/5 GHz/5 GHz
Operation Modes
Management: AP, Mesh and AP Mesh Modes
Standalone: AP, WDS AP, WDS Bridge, WDS Station, Repeater
Frequency Radio
2.4 GHz: 2400 MHz - 2835 MHz
Main 5 GHz: 5470 MHz - 5725 MHz, 5725 MHz - 5875 MHz,
Second 5150 MHz - 5250 MHz, 5250 MHz - 5350 MHz
Transmit Power
Up to 22 dBm on 2.4 GHz
Up to 22 dBm on 5 GHz
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2x2:2
SU-MIMO
Two (2) Spatial Stream SU-MIMO up to 1167 Mbps to a single client
MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 867 Mbps to two (2) 1x1 wireless devices simultaneously
Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS is 1 to 2)
Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 Streams
Channelization
802.11ac Supports Very High Throughput (VHT)VHT 20/40/80 MHz
802.11n Supports High Throughput (HT)HT 20/40 MHz
802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz RadioVHT 40 MHz (256-QAM)
802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID
Supports 24 SSIDs, 8 on 2.4 GHz and 16 on both 5 GHz bands
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
Cross-Band VLAN Pass-Through
Management VLAN
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
Complaint With IEEE 802.11e Standard
WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Management Features
Deployment Options
Stand-Alone (Individually Managed)
Managed Mode (with Neutron Series Switch/ezMaster)
Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Captive Portal
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Band Steering
Prefer 5 GHz
Force 5 GHz
Band Balance
Load Balance
Traffic Shaping
VLANs for Access Point Multiple SSIDs
Backup/Restore Settings
Auto Reboot
E-Mail Alert
Site Survey
Save Configuration as Default
Wireless Management Features (With ezMaster and Neutron Switch)
AP Auto Discovery and Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Band Steering
Prefer 5 GHz
Force 5 GHz
Band Balance
Load Balance
Traffic Shaping
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP - Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic and Usage Statistics
Real-Time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
One-Click Update
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler
Control Features
Managed Mode (w/Neutron Switch/ezMaster)
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting (802.1x)
Power Save Mode (U-APSD Support)
CLI Support
HTTPS
Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP Using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation
Environmental and Physical
Temperature Range
Operating: 32o F-104o F (0o C-40o C)
Storage: -22o F-176o F (-30o C-80o C)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Package Contents
1 - EWS385AP Tri-Band Indoor Access Point
1 - T-Rail Mounting Kits
1 - Ceiling and Wall Mount Screw Kits
1 - Mounting Brackets
1 - RJ-45 Ethernet Cables
1 - Quick Installation Guide
Certifications
FCC
CE
Item Dimension (L"xW"xH")
10 x 10 x 5

Weight
4 lbs

Warranty Information
1 Year

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.