TP-Link Network EAP225_V3 AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point Retail
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

TP-Link Network EAP225_V3 AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point Retail

Available:In Stock
$115.47
Image
Simultaneous 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1317Mbps Wi-Fi speeds

Free EAP Controller Software lets administrators easily manage hundreds of EAPs

Compatibility with 802.3af and Passive PoE support makes deployment effortless and flexible

Captive portal provides a convenient method for guest authentication

Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections

MU-MIMO means access points simultaneously transfer data with multiple devices, speeding up connections

Beamforming concentrates signal towards where you need it most, providing a fast and stable Wi-Fi experience

Supports management VLAN for an enhanced network management

Schedules can be set so access points automatically reboot and Wi-Fi turns on/off at the times you choose


Superior Wi-Fi Speeds with MU-MIMO Technology

Outfitted with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 easily delivers dual-band Wi-Fi speeds of up to 1350 Mbps to multiple devices at the same time.


Easy for Centralized Management

Manage and monitor hundreds of EAPs with ease, all from a single location. The TP-Link Omada Controller software provides an intuitive management interface. Control and map out the entire network from any connected PC. Theres no added cost, and no need for special training. Business Wi-Fi management has never been so efficient and cost-effective.


Efficient Guest Authentication with Facebook and SMS Support

Captive portal helps maintain only authorized guests to use the network, presenting devices with a convenient, user-friendly authentication method to grant Wi-Fi access. The addition of SMS and Facebook authentication simplifies the captive portal even further to simplify connectivity and boost your business.

HARDWARE FEATURES
Interface
Gigabit Ethernet (RJ-45) Port x1 (Support IEEE802.3af PoE and Passive PoE)
Button
Reset
Power Supply
802.3af PoE or passive PoE
Power Consumption
12.6W
Antenna Type
3 Internal Omni
2.4GHz: 4dBi
Mounting
Ceiling /Wall Mounting (Kits included)
Physical Security Lock
Yes
Hardware Watch Dog
Yes
WIRELESS FEATURES
Wireless Standards
IEEE 802.11ac/n/g/b/a
Frequency
2.4GHz and 5GHz
Signal Rate
5GHz:Up to 867Mbps
2.4GHz:Up to 450Mbps
Wireless Functions
Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Band Steering
Load Balance
MU-MIMO
Airtime Fairness
Beamforming
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client
Wireless Security
Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
Transmission Power
less than or equal to24dBm(2.4GHz)
less than or equal to22dBm(5GHz)
MANAGEMENT
EAP Controller Software
Yes
Email Alerts
Yes
LED ON/OFF Control
Yes
Simultaneous 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1317Mbps Wi-Fi speeds

Free EAP Controller Software lets administrators easily manage hundreds of EAPs

Compatibility with 802.3af and Passive PoE support makes deployment effortless and flexible

Captive portal provides a convenient method for guest authentication

Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections

MU-MIMO means access points simultaneously transfer data with multiple devices, speeding up connections

Beamforming concentrates signal towards where you need it most, providing a fast and stable Wi-Fi experience

Supports management VLAN for an enhanced network management

Schedules can be set so access points automatically reboot and Wi-Fi turns on/off at the times you choose


Superior Wi-Fi Speeds with MU-MIMO Technology

Outfitted with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 easily delivers dual-band Wi-Fi speeds of up to 1350 Mbps to multiple devices at the same time.


Easy for Centralized Management

Manage and monitor hundreds of EAPs with ease, all from a single location. The TP-Link Omada Controller software provides an intuitive management interface. Control and map out the entire network from any connected PC. Theres no added cost, and no need for special training. Business Wi-Fi management has never been so efficient and cost-effective.


Efficient Guest Authentication with Facebook and SMS Support

Captive portal helps maintain only authorized guests to use the network, presenting devices with a convenient, user-friendly authentication method to grant Wi-Fi access. The addition of SMS and Facebook authentication simplifies the captive portal even further to simplify connectivity and boost your business.

HARDWARE FEATURES
Interface
Gigabit Ethernet (RJ-45) Port x1 (Support IEEE802.3af PoE and Passive PoE)
Button
Reset
Power Supply
802.3af PoE or passive PoE
Power Consumption
12.6W
Antenna Type
3 Internal Omni
2.4GHz: 4dBi
Mounting
Ceiling /Wall Mounting (Kits included)
Physical Security Lock
Yes
Hardware Watch Dog
Yes
WIRELESS FEATURES
Wireless Standards
IEEE 802.11ac/n/g/b/a
Frequency
2.4GHz and 5GHz
Signal Rate
5GHz:Up to 867Mbps
2.4GHz:Up to 450Mbps
Wireless Functions
Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Band Steering
Load Balance
MU-MIMO
Airtime Fairness
Beamforming
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client
Wireless Security
Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
Transmission Power
less than or equal to24dBm(2.4GHz)
less than or equal to22dBm(5GHz)
MANAGEMENT
EAP Controller Software
Yes
Email Alerts
Yes
LED ON/OFF Control
Yes

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.