Supermicro Motherboard MBD-H11DSI-NT-B Dual AMD EPYC 7000-series SP3 SoC PCIe Brown Box
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Supermicro Motherboard MBD-H11DSI-NT-B Dual AMD EPYC 7000-series SP3 SoC PCIe Brown Box

Available:In Stock
$1,307.10
Image
1. Dual AMD EPYCTM 7000-Series Processors
2. 2TB Registered ECC DDR4
2666MHz SDRAM in 16 DIMMs
3. Expansion slots:
2 PCI-E 3.0 x16
3 PCI-E 3.0 x8
4. 10 SATA3, 1 M.2, 2 SATA DOM
5. Dual 10GBase-T LAN Ports
6. ASPEED AST2500 BMC graphics
7. Up to 2 USB 3.0 ports
Up to 4 USB 2.0 ports
8. 8 4-pin PWM Fan and Speed control

Physical Stats
Form Factor:E-ATX
Dimensions:12" x 13.05" (30.5cm x 33.1cm)
Processor/Chipset
CPU:Dual AMD EPYCTM 7000-series Processors
Socket SP3
Cores:Up to 32 Cores
Chipset:System on Chip
System Memory
Memory Capacity:16 DIMM sockets
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type:DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes:8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage:1.2V
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
SATA:SATA3 (6 Gbps)
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers:Intel X550 10G Base-T Ethernet Controller
1 Realtek RTL8211E PHY (dedicated IPMI)
VGA:ASPEED AST2500 BMC
Input / Output
SATA:10 SATA3 (6 Gbps) ports
NVMe:2 Internal NVMe Ports (PCI-E 3.0 x4)
LAN:2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
4 USB 2.0 ports (2 rear + 2 via header)
VGA:1 VGA port
Others:1 COM port (rear)
2 SATA DOM power connectors
1 TPM 2.0 header
Expansion Slots
PCI-Express:3 PCI-E 3.0 x8
2 PCI-E 3.0 x16
M.2:Interface: PCI-E 3.0 x2
Form Factor: 22110
Support SATA devices
Chassis ( Optimized for H11DSi-NT )
2U Chassis:CSE-213AC-R1K23LPB
CSE-216BE1C4-R1K23LPB
CSE-826BE1C4-R1K23LPB
CSE-829HE1C4-R1K62LPB
3U Chassis:CSE-836BE1C-R1K23B
4U Chassis:CSE-745BAC-R1K28B2
Server(s) ( with H11DSI-NT )
Model(s):AS -4023S-TRT
System BIOS
BIOS Type:AMI 128Mb SPI Flash EEPROM
BIOS Features:Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1
Management
Software:Super Doctor 5
Watch Dog
NMI
SPM
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations:ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU:Monitors CPU Core Voltages, +1.1V, +1.5V, +1.8V, +12V, +5V, +5V standby
CPU switching voltage regulator
FAN:Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED:CPU / System Overheat LED
Other Features:Chassis Intrusion Detection
Chassis Intrusion HeaderUID
Operating Environment / Compliance
Environmental Specifications:Operating Temperature:10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity:8% to 90% (non-condensing)
Non-operating Relative Humidity:5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
5.00lb
Warranty Information
1 Year
1. Dual AMD EPYCTM 7000-Series Processors
2. 2TB Registered ECC DDR4
2666MHz SDRAM in 16 DIMMs
3. Expansion slots:
2 PCI-E 3.0 x16
3 PCI-E 3.0 x8
4. 10 SATA3, 1 M.2, 2 SATA DOM
5. Dual 10GBase-T LAN Ports
6. ASPEED AST2500 BMC graphics
7. Up to 2 USB 3.0 ports
Up to 4 USB 2.0 ports
8. 8 4-pin PWM Fan and Speed control

Physical Stats
Form Factor:E-ATX
Dimensions:12" x 13.05" (30.5cm x 33.1cm)
Processor/Chipset
CPU:Dual AMD EPYCTM 7000-series Processors
Socket SP3
Cores:Up to 32 Cores
Chipset:System on Chip
System Memory
Memory Capacity:16 DIMM sockets
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type:DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes:8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage:1.2V
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
SATA:SATA3 (6 Gbps)
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers:Intel X550 10G Base-T Ethernet Controller
1 Realtek RTL8211E PHY (dedicated IPMI)
VGA:ASPEED AST2500 BMC
Input / Output
SATA:10 SATA3 (6 Gbps) ports
NVMe:2 Internal NVMe Ports (PCI-E 3.0 x4)
LAN:2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
4 USB 2.0 ports (2 rear + 2 via header)
VGA:1 VGA port
Others:1 COM port (rear)
2 SATA DOM power connectors
1 TPM 2.0 header
Expansion Slots
PCI-Express:3 PCI-E 3.0 x8
2 PCI-E 3.0 x16
M.2:Interface: PCI-E 3.0 x2
Form Factor: 22110
Support SATA devices
Chassis ( Optimized for H11DSi-NT )
2U Chassis:CSE-213AC-R1K23LPB
CSE-216BE1C4-R1K23LPB
CSE-826BE1C4-R1K23LPB
CSE-829HE1C4-R1K62LPB
3U Chassis:CSE-836BE1C-R1K23B
4U Chassis:CSE-745BAC-R1K28B2
Server(s) ( with H11DSI-NT )
Model(s):AS -4023S-TRT
System BIOS
BIOS Type:AMI 128Mb SPI Flash EEPROM
BIOS Features:Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1
Management
Software:Super Doctor 5
Watch Dog
NMI
SPM
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations:ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU:Monitors CPU Core Voltages, +1.1V, +1.5V, +1.8V, +12V, +5V, +5V standby
CPU switching voltage regulator
FAN:Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED:CPU / System Overheat LED
Other Features:Chassis Intrusion Detection
Chassis Intrusion HeaderUID
Operating Environment / Compliance
Environmental Specifications:Operating Temperature:10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity:8% to 90% (non-condensing)
Non-operating Relative Humidity:5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
5.00lb
Warranty Information
1 Year

Return Policy : Our top priority at Fazter is to provide our customers with quality products and 24/7 customer support. For us, Customer satisfaction is the topmost priority. If any customer is not completely satisfied with the product they received, they can quickly return an unopened brand new product within 20 days of delivery.

If the customer receives a defective product, it can be replaced within 3-4 days from delivery. We will credit or exchange after receiving RMA (Return Merchandise Authorisation Number). 

Refund :We will refund the full amount if there is something wrong from our end during shipment or else there will be a deduction of 20% as a restocking fee. Also, you will have to apply for RMA# within 3-4 days under defective product and 20 days for unopened box. For any refund, customer will have to pay shipping charges while sending back to our supplier. 

We will give you a confirmation within 2-3 days after receiving your complaint. Refunds may take up to 30 days, depending on the warehouses but generally, it won’t take more than a week or so. 

Replacement :If you require a product replacement due to damage or shipping error, we will be sending you a replaced product. If you want to exchange products for another, we will be issuing a credit that can be used for the exchange.  

T&C- *All returned merchandise must be in its original packaging conditions and accessories. We reserve the right to deny the request for return or exchange if it is not returned with all related accessories and proper conditions. 

Broken/Damaged/Defective Products:Please ensure that the product quality is accurate and if there is any damage from our end, contact us immediately within seven days of delivery. We’ll be replacing it.  

Restocking Fee :20% will be deducted from the amount made for purchasing the product if the damage or any defect is not from the supplier’s end. 

Contact us before sending any item back to us. 

Types of Returns :

Unwanted -You will get a refund of the product's cost if there is any fault from our end only after complete verification of the customer’s information. 

Returned to Sender -You will get a refund of the product’s cost, but shipping charges will be deducted. 

Lost in Transit-If any product gets lost during shipment, we will initiate a claim with the carrier; if the item is found/delivered to the customer, the request will be closed. If there was insurance on the order and the page approves the claim, you will receive a full refund.  

Defective -You will get a replacement for the defective product, or you can also request a complete refund. In both cases, the customer must apply within 3-4 days after receiving the order and submitting all information. Then, we will analyze and confirm in 2-3 business days.   

Damaged -Damaged product must be reported within seven days of delivery, and we will initiate a damage claim with the carrier. The customer must prove the damage (usually photo(s)) to submit the request. You will receive a refund just after the claim will get approved. 

Missing Part(s) -In most cases, we will get the warehouse to send the missing part(s). 

Not as Described -If you receive a different product, you will receive a refund after inspection. 

Shipping Labels -Buyers have to pay return shipping; in some cases, we may send return labels. 

Non returnable items-Include software, Cloud, or non-physical products.